6.0 LQ9 in 99 Denali. 2010 truck t-body/intake/injectors. Using X-Link to interface the 87 mm 4 bolt t-body to 05 wiring harness. Problem is when I move the throttle pedal (APP) the throttle body moves too much. 50% APP is half pedal but activates t-body WOT. Which values in TunerPro are used to adjust this? Thanks, Jeff
Depends on how it's labeled in the XDF. Without the xdf your using hard to say for sure but in HP tuners the settings are called etc settings, for Electronic Throttle Control.
No need to re-invent the wheel. But we can make it better
Thank you.
The .xdf file is "XDF File - Operating System 12587603 - 1MB PCM - 2004 model year.xdf" It does not have an ETC catagory, Only ETC parameters I could find are under the idle catagory B4349 ETC Throttle Area Correction (mine is set at 0.02077 % per Sq mm) and B4350 Max Desired Idle Area ( Mine 84 Sq mm) Do I need to use a different XDF? copy of my BIN enclosed. Thank you, Jeff
Last edited by MO LS Noobie; 04-11-2022 at 06:21 PM. Reason: spelling
universal Patcher found the following tables in picture attached.
Also see what HPt has defined for an 04 truck in 2nd picture
No need to re-invent the wheel. But we can make it better
See the tables found by using paraemter finder in tuner pro with this xdf
http://www.gearhead-efi.com/Fuel-Inj...7603-XDF-files
Tools> Parameter finder
No need to re-invent the wheel. But we can make it better
Posting Permissions
Reply With Quote
Bookmarks