Have you adjusted your injector data to reflect a return style system at 43psi? Depending on what 5.3 file you are using, the injector data could be for return or returnless, but in either case the data is for a system at 58psi.
Have you adjusted your injector data to reflect a return style system at 43psi? Depending on what 5.3 file you are using, the injector data could be for return or returnless, but in either case the data is for a system at 58psi.
Good call Pulse. I meant to mention that too. Correct injector data is critical for a good baseline.
-Carl
You guys are awesome, I didn't even think to adjust the injector data. I set it to 43 PSI based off the multec 2 data that I found. But if the correct operating pressure is 58 psi then I'll adjust accordingly.
I did try a 6.0 stick file but it turned out to be corrupted and I haven't found much luck with finding an ls1 stick file to utilize for a base tune for the 0411 pcm I'm running.
Posting Permissions
Reply With Quote
Bookmarks