if you're using my EEX XDF there is an automatic transmission flag called 'automatic trans enable' you can just turn it off.
you'll need to monkey with the VSS stuff and idle stuff
your ecm wont do electric lockup anymore if you have such a converter in your TH350
but imo the 4l60E is WAY better than a th350, you are making a mistake. electronically controlled transmissions are great.
tell me you aren't changing it just to avoid learning to tune
To be honest that’s part of it haha just want to get this long overdue project on the road I had the tune done a few years ago and barely got the car going the 4l60e wasn’t going into 3rd or 4th sometimes it would if I jumped on it tcc would never lock up I couldn’t figure it out and the place that did the tune is no longer around not sure if the problem comes from the gear ratio and wheel size being different than what the tube was for
I might have missed it, but did not see where you posted your bin file
ill post it right now give me a second
ive attached it here
I’m eventually going to go back to the 4l60e I’m going to rebuild it soon as soon as I’m done with another project so for the time being wanted to throw in one of these other transmissions in I can’t seem to find the enable transmission feature on tuner pro
Are you using Parameter Category view?
autotransenable.jpg
1990 Corvette (Manual)
1994 Corvette (Automatic)
1995 Corvette (Manual)
Thank you sir ! Figured it out using the EEXTRA xdf
Posting Permissions
Reply With Quote
Bookmarks