Help with some lt1 tuning tuner pro

[Magoo_oner]

ive attached it here

[Magoo_oner]

I’m eventually going to go back to the 4l60e I’m going to rebuild it soon as soon as I’m done with another project so for the time being wanted to throw in one of these other transmissions in I can’t seem to find the enable transmission feature on tuner pro

[NomakeWan]

Are you using Parameter Category view?

autotransenable.jpg

[Magoo_oner]

Thank you sir ! Figured it out using the EEXTRA xdf

[Magoo_oner]

Ok so got the trans in disabled the Automatic transmission controls now to find a mechanical to electric speedo conversion that puts out the 40 ppm the ecm needs for the vss everything I find is 8k ppm I read some say I can use a vss from a 1990 pick up but not sure how that works