gen 5 MAF vs "LS7" gen 4 MAF - are they the same but different?

[bobcratchet555]

can i share .hpt files on this forum, or is that frowned upon?

thanks

[bobcratchet555]

it will be sitting like this. the MAF is in the portion that is attached to the filter box.

[In-Tech]

What ecm/pcm are you wanting to make this work with?

[bobcratchet555]

either an 0411 or a P59 with dbc support.

all the applicable .hpt files that i have attached. easy enough to interpolate the data from this and copy it into P01/P59 format, i just dont know if its even applicable to the gen 4 MAF

edit: had to zip them up due to the file size limit on hpt files set as 1.71 MB

[Fast355]

either an 0411 or a P59 with dbc support.

all the applicable .hpt files that i have attached. easy enough to interpolate the data from this and copy it into P01/P59 format, i just dont know if its even applicable to the gen 4 MAF

edit: had to zip them up due to the file size limit on hpt files set as 1.71 MB

Converting a GenIV MAF to GenIII PCM, I copy the values that overlap and interpolate between. That gives a decent starting point.

I am also about to go through this learning curve putting my SBC on an E67 to run a 6L90E.

[bobcratchet555]

well, i THOUGHT i had an LS7-style card MAF hanging around, but turns out i accidentally bought some other stupid thing from the junkyard that won't be useful at all.

so........might just try a gen 5 MAF :)

[In-Tech]

can i share .hpt files on this forum, or is that frowned upon?

thanks

I don't think anyone frowns on that, especially in its own thread.