What "calibrator" are you using, the latest TunerPro RT, I hope?

Where you quoted the part about injectors and fuel pressure, it looks like you're reading from "Introduction to Tuning Part 2. Just follow his instructions. For example, BPC. Your EBL should have come with the "EBL Utility" which will give you the values for that after you plug in the numbers on the left. Then copy the column and paste it in to the Table BPC - BPC vs VAC. Just keep following the instructions so you'll see what's going on and check to ensure they're germane to your setup. There's also "Calibration Help" included with the EBL which defines all of the Constants, Switches, and Tables - enjoy!