Tunerpro and ACSU bin off stock chip

[clarkent5477]

Hello: Pardon the newbie question; I'm new to tuning. I read the bin off my stock ACSU chip out of a 1227747 PCM. After loading it in Tunerpro with the requisite mask file, I seem to be getting some weird results. I wanted to adjust the idle and pulled up the Desired C/L Idle (assuming this is where idle is stored) and got the attached: values were all over the place and didn't make sense. Any ideas what I'm doing wrong here? Thanks in advance!

Oddly, I also tried burning the ARJU bin to a 2732A chip and after plugging it into the 1227747 PCM it yielded a fast flashing check engine light. I was able to do this just fine two weeks ago with the 1228747 bin and mask off this site. Plugged that chip into a 1228747 PCM and it worked like a champ. After finding out the 1228747 doesn't come with knock sensor input, I have to go back to the 1227747 PCM