I think I’ll keep the computer that i have since i can run the correct bin on it and I’m definitely not burning the rig down i just spent 15k to restore it from the frame up. Yes my neighbor has a 94 I’ll plug my scanner into his truck tomorrow and see what it does
Glad to hear. Too many repairable trucks end up in the scrap yard and are replaced with new trucks that aren't made as good. Well that's my opinion.
No need to re-invent the wheel. But we can make it better
I agree, I’ll sell my 2018 Silverado before i ever sell my 93, there just so well built, reliable, easy to
Work on and parts are cheap. Just sucks that there a bit hard to diagnose since they are Obd 1 but with those cables available that should solve that issue. I didn’t even know there was ways to pull live data on Obd 1 until
Like 1 month ago, that’s way i rushed to buy that scanner i taught i had found gold lol.
I’ll mess with the truck a bit tomorrow and get back to you on the scanner results
So I hooked up my scanner to my neighbors truck, which is a 94 with a 5.7 L with a 4l80e transmission and not only does my scanner show a lot more information on his truck, but I was also able to verify that his throttle percentage at idle was 0% and his idle requirement was 713 and this is in park so that tells me that there’s no issues with my scanner but rather something going on with my truck so if there’s anyway that you can point me in the right direction at this point, I would appreciate that. Also I have attached the pictures of all the readings from my neighbors truck. He’s having issues with a strong exhaust smell /running rich I guess you could say so if you guys don’t mind looking at the pictures and letting me know if any of those numbers stand out to you that way maybe I can point him in the right direction to get his truck fixed thank you.
Last edited by maronielb; 03-14-2024 at 06:15 AM.
The more data is from the 7427 PCM, or equivalent service number.
I personally am wondering about the prom, if it's stock, or uncorrupted. Optimal thing would be if you had another prom to substitute for testing, but short of a trip to a u pull it salvage yard, kinda pricey to come up with one.
No need to re-invent the wheel. But we can make it better
I see, would i be able to put a 7427 in my truck? Where would i be able to get a prom? My truck has a reman computer in it but i opened it up and the BCC code is correct for my truck but I’m
Not sure if they swapped the prom from the old computer into this one or if this reman unit came with the prom
Already in it. I just want a 700 rpm idle is that to much to ask for lol
Does he have any codes?Originally Posted by maronielb
It appears it has been trying to lean the mixture to the extent it's allowed with a 111 BLM or long term, and it's open loop, short term is 128, 128 - no adjustment. Scanner says it's rich. Did he possibly crank his fuel pressure? O2 sensor health?
No need to re-invent the wheel. But we can make it better
He rebuilt the throttle body not to long ago but he used a stock rebuild kit so the fuel diagram is not messed it, also truck has a new fuel pump. O2 has not been changed, truck sat for years before he got it recently
On your neighbors truck the IAT (intake air temperature) is -40. This will make it run rich and indicates either a bad sensor or more likely the sensor is unplugged.
Last edited by MO LS Noobie; 03-14-2024 at 02:10 PM. Reason: additional info
TBI does not have IAT, or MAT. It uses engine coolant temp.
No need to re-invent the wheel. But we can make it better
Exactly! I was surprised that was even showing up on my scanner
Posting Permissions
Reply With Quote
Bookmarks