Too bad you could have gotten a decent USB to aldl cable for about half that much, then you could pull the bin file from the diagnostic port and verify nobody has screwed with anything on it. Plus you could get a data log recording instead of just looking at a small scanner screen.Originally Posted by maronielb
No need to re-invent the wheel. But we can make it better
When can i get the cable for $100? Last i checked it’s like $140 for. I’m still willing to purchase one if it’s $100
Boosted NW has them for $120, shows only one left in stock, RedDevilRiver if I'm reading correctly, is $55. If you had a serial port laptop you could make one, I've never done it before. There are a few on eBay for not a lot of $. Not sure who makes them
No need to re-invent the wheel. But we can make it better
Also there is ALDLcables.com
No need to re-invent the wheel. But we can make it better
Would i use this cable with tuner pro? Also can you send me a link to the cable you have/would buy if you were in the market?
Yes you could use it with tunerpro rt, or aldl droid, or any other scanner or datalogger program for GM obd1. Tuner pro is probably going to have the most public support as most everyone on this site uses it. You'll need an adx file for your mask.
The one I have I got from moates, they are no longer in business, boosted NW has taken over their market to offer the same exact products moates used to offer, I like the idea of supporting such an effort. On the other hand the red devil river one comes with a disc, and it would be interesting to see what's on the disc.
No need to re-invent the wheel. But we can make it better
Here is a link to $9a adx on this site. http://www.gearhead-efi.com/Fuel-Inj...ll=1#post17006
No need to re-invent the wheel. But we can make it better
https://boostednw.com/emulation-cabl...-gm-datalogger
Boosted NW
http://aldlcables.com/
Aldl cables .com
https://reddevilriver.com/home-page/ols/products/gm-12-pin-aldl-to-usb-cable
Red devil river
https://reddevilriver.com/home-page/...scan-bluetooth
Bluetooth option
Last edited by ralmo94; 03-08-2024 at 07:49 PM.
No need to re-invent the wheel. But we can make it better
Red devil river seems to be the cheapest one so i will
Probably go with that one. I just messaged them to see what the cd/usb are for. I’ll keep you updated. Also thank you for the ADX file, from my understanding that’s the one needed if i want to log data? At this point i don’t want to/need to log data do i? I just want to be able to see all live data the computer is receiving from the sensors and also it would be nice to view the parameters in my current chip. Will i be able to do that using tuner pro and getting that cable?
Posting Permissions
Reply With Quote
Bookmarks