and you're sure the correct com port is selected?
and you're sure the correct com port is selected?
Yes, verified several times. Also Uninstalled all coms and went to com 3 as my numbers were getting up there.
When I click test interface it says both cables should be good to use. But neither will read or write. I have a feeling it's something the computer is doing with the hardware.
it's weird for sure. i have like 1/100 users eventually report weird interface issues. maybe it's just a crap interface with a counterfeit chip dying or bad wiring in the car. i would consider doing one of my DIY interfaces and just trying it to see if that works instead. go on ebay, buy a FTDI TTL interface, hook the RX and TX wires together, and connect them to the data pin, and ground to the ground. instant 10 buck ALDL cable. i developed flashhack entirely with an interface like that. the wires were literally twisted together. it never failed.
Bookmarks