Dave the file you up loaded appears to be a data log??? what am I looking for in it?
how do I know if the tuner pro is seeing and displaying 0-5 volts correctly?
so I played it back and the wide band did not move or show any data.
I played back using my bin file, advance 0, and 217 files.
Try using the attached .adx file to playback the data log I posted. The attached is the .adx file I'm using, so I know it's good.
The exported .csv data log shows WBO2 data.
Closed Loop.jpg
Open Loop.jpg
Playback TunerPro RT data log tutorial.
Play TunerPro RT Data Log.JPG
Last edited by dave w; 3 Weeks Ago at 04:11 PM.
Hello Dave, when I used your ADX file, the target AFR dial gauge was reading 14+/-. also when I used it to play the data log, it was operating correctly.
The Wide band square below dial gauge was reading 11 and the AEM gauge was reading 14.
Tomorrow I am planning the see what the voltage reading is with a meter on the analog wire when warmed up.
I am looking to confirm the AEM gauge showing 14 is sending the matching "X" voltage to the ECM. This is just a sanity check.
If it is matching then we know its in the ECM or the scalers or something.
Step one is confirm voltage.
Last edited by Sledhead2; 3 Weeks Ago at 04:57 AM.
Bookmarks