16146299 ecm with a AWLK bin

[Condor78]

Hello everyone.
I have been working on a 1992K1500 Z71 bone stock. It was ordered with the NV4500 5 speed transmission from the factory. I am the second owner and have had this baby since 2009, 234k miles and going like it did new. I thought I would post the stock bin to this thread incase anyone could use it in the future. I have learned quite a bit over the years so don't hesitate to hit me up and I look forward to learning more from everyone here as well.
Thanks,

Jeremy

[dave w]

Thank you.

Your invited to share your .bin to the $99 link : http://www.gearhead-efi.com/Fuel-Inj...Information-99

[Condor78]

see above, thx

[Condor78]

Thank you.

Your invited to share your .bin to the $99 link : http://www.gearhead-efi.com/Fuel-Inj...Information-99

Sweet! I clicked on the link which took me there, but as I reply to the newest to share the bin, it is saying I don't have the required permission to post? Is there a different way that I need to do it? Thanks so much

[dave w]

Sweet! I clicked on the link which took me there, but as I reply to the newest to share the bin, it is saying I don't have the required permission to post? Is there a different way that I need to do it? Thanks so much

Maybe Reply to Thread in the upper left of the page.


Reply to Thread.JPG

[Condor78]

Maybe Reply to Thread in the upper left of the page.


Reply to Thread.JPG

Mine doesn't show that option when I am on that particular thread. Is it archived, possibly? Or maybe locked for editing?

[dave w]

Possibly sent a private message to the site administrator, 1project2many about not being able to post on the $99 thread.

Similar threads allow posts.

[In-Tech]

Doesn't he need 10 posts or something to allow attachments?

[1project2many]

No Post counter here.

Condor78, is it possible you weren't logged in? If you don't check "keep me logged in" the site software will automatically log you out.

[Condor78]

No Post counter here.

Condor78, is it possible you weren't logged in? If you don't check "keep me logged in" the site software will automatically log you out.

I double checkec, even logged out and back in. Here are two screen shots of what it shows on the main page as well as if I try to reply to a post on that page to post. I can go on to any other page and the top left shows an option to post to the thread but no on this for some reason. Hope this helps

[stew86MCSS396]

No Post counter here.

Condor78, is it possible you weren't logged in? If you don't check "keep me logged in" the site software will automatically log you out.

That's not it...I think the administrators/mods made those pages requiring "elevated privileges" to add/modify those pages. Only way to add that bin is to ask a moderator.

[dave w]

I double checkec, even logged out and back in. Here are two screen shots of what it shows on the main page as well as if I try to reply to a post on that page to post. I can go on to any other page and the top left shows an option to post to the thread but no on this for some reason. Hope this helps

Post #1 has been copied to: http://www.gearhead-efi.com/Fuel-Inj...Information-99

Thank you again for sharing.