Makes sense.

So I'm in the process of correcting this tune. Neither the cylinder volume nor the flow rate were changed (712.77cc and 23.75lb/min). Went to autocross this weekend and logged the ride there as well as the runs. My long term BLMs while running are mostly pinned at 160 (max BLM setting) but the STFTs are pretty happy.
My thought process is this: Correct the cylinder volume, don't touch the fueling tables, allow the car to sort itself for a while (30+ min of driving, hitting as many BLM cells as possible). Do a data log during this initial drive and another once BLMs have moved closer to 128.
I'm assuming this will get me close to the proper fueling. From here I can use the second data log to adjust the fueling table and repeat.

Does this sound right? How do I get the LTFT BLMs reset before I run with the new parameter (CylVol)? Do I need to worry about wiping the cylinders if the old BLMs remain (I'd assume a BLM of 160 against the correct fueling would be WAYYYY too rich, although I am on stock injectors so that might mitigate the issue).

My main concern is physically hurting the engine by running way rich before it has time to pull fueling.