Page 3 of 3 FirstFirst 123
Results 31 to 39 of 39

Thread: 2002 TunerPro Bin Files

  1. #31
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    52
    Posts
    3,585
    Thank you! Great way to begin.

  2. #32
    Carb and Points!
    Join Date
    Nov 2019
    Posts
    4
    Iím looking for 5.3, 2wd, 4L60E, truck MAF and stock LS1 intake calibration/bin.

  3. #33
    Carb and Points!
    Join Date
    May 2021
    Age
    45
    Posts
    5

    2002 LS1 Auto Bin..

    I am needing a 2002 LS1 w/Auto trans bin. If anybody can help me out with this I will be forever in your debt!
    Last edited by Eddieg9600; 08-21-2021 at 01:22 AM.

  4. #34
    Carb and Points!
    Join Date
    May 2021
    Posts
    1

    2002 Chevrolet YukonXL LQ4 DBW 4L60e AWD (12212156)

    Whatever happened with the segment swapped 5.3 4L80e? Regardless, I just recently grabbed a PCM from a 2002 YukonXL with an LQ4 (verified pistons) with an AWD 4l60e/65e not sure which. It is also DBW. This is the stock tune pulled with PCM Hammer.
    Attached Files Attached Files
    Last edited by MrHappy013; 06-16-2021 at 06:49 AM.

  5. #35
    Carb and Points!
    Join Date
    Nov 2019
    Posts
    4
    Quote Originally Posted by Eddieg9600 View Post
    I am needing a 2002 LS1 w/Auto trans bin. If anybody can help me out with this I will be forever in your debt!

    http://gearhead-efi.com/Fuel-Injecti...8530#post88530

  6. #36
    Carb and Points!
    Join Date
    Jan 2021
    Posts
    3
    12212156 is supposed to be universal, but before I screw anything up does anyone happen to have a 2002 Chevy Astro AWD with 4l60e bin? I'm fairly confident I can just use whatever 12212156 that is close and simply copy over everything but I'd really like to start out with a known astro/safari bin if at all possible. I'll straight up paypal someone $5 if that is allowed.

  7. #37
    Carb and Points!
    Join Date
    Apr 2021
    Posts
    4
    removed
    Last edited by Lurch228; 10-05-2021 at 06:52 AM. Reason: need to quote poster.

  8. #38
    Carb and Points!
    Join Date
    Apr 2021
    Posts
    4
    Quote Originally Posted by THEFERMANATOR View Post
    These are both from 02 C6500 GMC's with the 8.1l, but an AT545 non electronic automatic. You can segment swap them over for swaps using a non electronic auto(700r4, th350, th400, and so on). Unfortunately they only used the 2088 and 6125 with the DBW 8.1L.
    Thanks for the file post, was what i needed for a th400 to lq4 pairing!
    Your 2088.bin file id's as a 8322 OS with PCM BIN Builder. Just wondering if you were aware of this. As I had to use a 8322 OS to get the segment swap to not throw a mismatched OS and would not complete with a 2088.bin file. Again thanks,

  9. #39
    Carb and Points!
    Join Date
    Nov 2021
    Age
    41
    Posts
    1
    Good night friend, I am very very new to tunerpro and I would like to learn a bit I have downloaded a bin file right now but I see that it is asking me for the XDF file which I do not have, I did not know I am in the right direction asking for help in this way or in estge forum place
    The question is where do I get the XDF from, do I have to ask for it exactly for each ecu?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •