2002 TunerPro Bin Files

[Playtoy_18]

enjoy.
i’d like to parrot Dave W. and say these threads are for stock files only as well, it was how Mark intended I know as he dm’d me before years ago when he found some of mine were mistakenly labeled stock so I could remove them.
It’s been that way for a good reason a long time, I suggest mods deleting or moving any known modified files.
New guys haven’t had the “always use a known stock file” drilled into them enough and this at least keeps them from making that mistake whether they like it or not.

[bobcratchet555]

dont think i saw a 2002 lr4/4l60e file in here, so here goes. pulled directly from the boneyard.

[dave w]

i am in need of a bin file for a 2000 5.3 with a E1840 stage 2 cam with egr delete and 2nd o2s delete and speed limit delete and neutral safety switch delete with a nv3500 please

The original intent of this thread was for stock .bin files only, which makes sense.

Requesting modified .bin files is not the intent of this tread, perhaps a new thread in the OBD2 forum is a better place to ask for a modified .bin file

[dave w]

enjoy.
i’d like to parrot Dave W. and say these threads are for stock files only as well, it was how Mark intended I know as he dm’d me before years ago when he found some of mine were mistakenly labeled stock so I could remove them.
It’s been that way for a good reason a long time, I suggest mods deleting or moving any known modified files.
New guys haven’t had the “always use a known stock file” drilled into them enough and this at least keeps them from making that mistake whether they like it or not.

gearhead-efi is supported by volunteers, not endless popup advertisements.

[Darreljones]

hi . iwanted to ask if you had any luck with manual 5.3 xdf or bin?

[kson2020]

Hi im looking for 2002 Chevrolet Express Van L31 5.7 Litre 4L60 4x4 (12212156).bin . or will the 2wd bin

[kson2020]

Hi im looking for 2002 Chevrolet Express Van L31 5.7 Litre 4L60 4x4 (12212156).bin . or will the 2wd bin

[1project2many]

Hello,

The 4X4 vans were built from a 2wd van by an outside contractor. You should start with a 2wd .bin file.

[TilmanNA]

Hello! so, what did you come up with? I see the 2wd version on here. That's also what I am operating with, however I am converting it to manual. Did you figure out a 4wd, for that is part of what I got going on!

[Dato1]

hi there i am new to this an you tell me how to get a xdf file for ur bin files please?

[ralmo94]

hi there i am new to this an you tell me how to get a xdf file for ur bin files please?

Depends what bin you need it for.
If it's for a bin that has the 2156 Operating System, check this thread.
http://www.gearhead-efi.com/Fuel-Inj...S-12212156-xdf
If it's for a different OS, you will need the correct one for the OS