Support The Forum: Buy ALDL Cables!

[Tunedperformance]

I'll take one to try on a 730 what's your paypal address robert ?

[RobertISaar]

it would take me a few weeks to get the parts needed shipped in...

i really need to just stockpile a good 10 or so of everything needed to get the stuff done within a day of a request.

[EagleMark]

Does this have a 10k switch that can be turned on AND off?

[Tunedperformance]

let me know when I can get one

[RobertISaar]

Does this have a 10k switch that can be turned on AND off?

that is what the switch on the side is for... could also make it a direct link if for some reason you wanted to be able to flash codes on the SES light if you knew you would never need the 10K resistor.

[EagleMark]

Cool! Cables got to have an on/off 10k switch!

I'll take two!

[RobertISaar]

i guess i should start ordering parts then... :D

[sherlock9c1]

I'm interested in one as well for my '94-95 LT1s. But let me ask - I have an existing ALDL cable that's 6' long - could you make an option where you send me the box all built up with everything BUT the ALDL cable portion and then I'll just wire my ALDL cable into the box myself?

[Tunedperformance]

I'll take one to try on a 730 what's your paypal address robert ?

I never heard back , take me off the list please.

[RobertISaar]

ugh, that's what happens when it takes 5 1/2 months to find reliable suppliers combined with my spotty record-keeping.

[roughneck427]

Have any cables that do 160 baud if so I'd like to buy one

[RobertISaar]

they'll all do 160 with no problem....

lack of supply is a problem though. i have parts inbound, but no time estimate yet.

[RobertISaar]

1 is ready to go, i'll need to see what drivers i'm using with it to keep it simple during installation.

another will be ready pretty soon as well.

[tolow4phathoes]

ARe you still selling these cables? If so I'd like to purchase one.