Quote Originally Posted by Davis_1377 View Post
Oh I done that before I first wrote you, I thought you was wondering what all I tried.

I used the jet 2 for this if that was the best thing to do. I set the desired idle speed on 850 and the spark table on 22. Did you want the whole table at 22 or just around idle cause I set it there at about idle? At a point it idled up to a part of the SA table i didnt move that was about 26 degrees.

Heres the log I believe the way you wanted. I had to drive alittle to get into closed loop. It has a 180 degree thermostat also.
At idle Closed Loop the BLM is 108, that is as far as BLM will go to take away fuel. VE has to much fuel at idle.

Look in the XDF, use categories and find the hacks, apply the BPW and Spark Advance hack, NOT TPS, and you can see Spark Advance and fueling in data stream.