Thanks ill give tjat a try, speaking of that I tried to see what my injector size was but could not make out any numbers or colors other then the orange insulators on the pins. My bin is set for 61 lb/hr as of right now, ill try increasing. Also is o2 data bouncing normal?
Is there one of those spreadsheets for the 7730. I looked on several threads but didn't see any. I smoothed me ve tables and went and datalogger a short trip with ALDLDROID. My BLM is all over the place. Trying to figure out how to make the changes I need.
The attached spreadsheet is what I use for $8D. The spreadsheet IS NOT Microsoft Excel beginning user friendly!
After "crunching" the data log with the Analyzer spreadsheet, I use the $8D VE Fixer spreadsheet.
Pay close attention to 1600 RPM's VE values, they are shared in both lower and upper tables and must match!! Interpolate the 1600 RPM valves not shared in the lower VE table.
The attached Excel spreadsheet will not work with Open Office.
dave w
Cant seem to get it to work on my tablet either. Is there a file for it I can download on my tablet and transfer to my computer. I have no internet for my computer.
Do you have Microsoft Excel? You need it and the attached spreadsheet above
Yeah I pretty sure I have excel. But when I click on the spreadsheet attached it only shows me a bigger picture. Can't seem to download it. Also I'm using $A1 mask. Will it even work for me.
No, unfortunately the spreadsheet is for $8D only.Originally Posted by 88GTTuesday
dave w
Posting Permissions
Reply With Quote
Bookmarks