Yes I do have the $88 XDF you recently uploaded. Thank you so much for doing that!!
I have possibly a bit more info from an email I originally received from my tuner:
04032008 60pp 86 Fiero 2.8 4-speed 7730 My Name Here BAWX 1.0
Shipping out to you is your reprogrammed mem-cal. I have made all of the changes to
its programming so it will work properly in a Fiero application. If you need to hook up a
scan tool to this ECM, you will need to set it up for a 1991 Chevy Camaro 3.1L vin T
engine and 5-speed manual transmission.
The mem-cal you sent came out of an 89 Chevy Cavalier with the 2.8L MFI V6 engine
and auto trans.
When you say "import" settings from the stock calibration do you mean from the stock Fiero (AKYN) bin? I did find another bin here that's exactly my car: HWX 86 Fiero 2.8MPFIHO 4 speed manual.bin Should I be using it, not sure if it makes a big difference?
So your suggestion is compare the stock bin from above (HWX) to my current BAWX and match as many settings as possible? Should I start with a stock BAWX bin also or from my currently modified one? I'll have to figure out how to disable EGR and Knock if I start from scratch. I assume there is no way to actually import bins and I'll just need to do a compare and manually do the changes?
If I am starting from scratch, in your opinion is there a better code mask other the $88 that would suit my application? I assume $88 is the right choice seeing as about the only difference is its for a 3.1L, AFAIK.
Thanks again for the help!
Bookmarks