Hi

[pkincy]

Found the signature editor but carriage return doesn't work either in this post or in the Signature editor. Is there no way to space and make paragraphs? Let's see if the signature comes through on this edit. The avatar did.\\

[pkincy]

OK, if it won't appear on an edit, let's try a reply. Edit: Carriage return doesn't work on reply either nor does signature appear. OK, does as a single straight line at the bottom. So no carriage return on the signature nor on the post to save space I presume.

[EagleMark]

Settings, General settings, Message Editor Interface:, Standard Editor - Extra formatting controls and save. Works for those with issues like yours.

[pkincy]

Your suggestion appears to have worked.

Thank you.

[dave w]

dave w

[pkincy]

Another simple question. Does the Search this Forum not work? I searched for DA2 and DA3 (my cars def files) and returned no results. Seems odd as these are cars talked about a lot here.

[EagleMark]

Search here will work with four letters... here's your $DA2-3 thread:
http://www.gearhead-efi.com/Fuel-Inj...mation-DA2-DA3

Can use google or if you have a Google account, a member here set up a Google Custom Search:
http://www.google.com/cse/publicurl?...z-bg#gsc.tab=0

[pkincy]

Thank you for that.

I am still a bit confused by the def files for the early LT1 chipped Y Bodies. TunerPro shows both DA2 and DA3. I was under the impression that the Y body used DA2 for both 92 and 93 and the F Body used the DA3.

Although the computers themselves are interchangeable, I have never tried putting my 93 F Body chip in my 93 Y body probably won't. One is an A4 and the other is a 6 speed, but I have moved the same bin from an A4 93 F to a T56 93 F (my old race car) and it worked.

Thank you again.