Results 1 to 15 of 26

Thread: Is there a 2006 DBW Manual Trans file?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Fuel Injected!
    Join Date
    Feb 2013
    Posts
    30
    Quote Originally Posted by Buzz View Post
    Jeff - that file should be what he needs. All V6 truck of that era were DBC. The "Hex Edit" in the file name causes some concern though !
    I'm going to give it a try today. Do you think it being DBC will mess me up when I'm only moving the trans module over?

    And by the way, I do appreciate all the help :)

    And still wouldn't mind trying a non-flex, DBW, 5.3 engine module (OS 12582811) in my 4.8L MT file if anyone runs across one of those. in m

    Todd

  2. #2
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    64
    Posts
    10,477
    There's a ton of OBDII files I have not checked or titled properly here:
    http://www.gearhead-efi.com/gearhead-efi/OBDII/

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  3. #3
    Fuel Injected!
    Join Date
    Feb 2013
    Posts
    30
    Quote Originally Posted by EagleMark View Post
    There's a ton of OBDII files I have not checked or titled properly here:
    http://www.gearhead-efi.com/gearhead-efi/OBDII/
    Thanks! That was very helpful. I was able to find some LM7 files with the same OS as my LR4 MT file and then also found a 2006 L33 file (different OS) and was able to compare to an LM7 and then export/import the tables that were different.

    Now I just need to figure out the injectors (from LS1/LS6) and I should be really close to stock (LS1 intake manifold, LS3 exhaust manifolds & custom CAI). Then we'll log some data and see where we are at.

    If all goes well, I should have a good 2006 L33 MT file for anyone else that might need it. I posted a pic of our project. It is my son's '85 RX7.

    Anyway, thanks again for all of the help.

    Todd20130629_220614.jpg

  4. #4
    Fuel Injected!
    Join Date
    Aug 2020
    Posts
    20
    really old thread... but thought I would post that I have a 2006 Chevy 2500 HD with a 6.0 and NV4500 manual trans. The OS is 12587811 and I have the xdf for it if needed.

  5. #5
    Fuel Injected! Pulse_GTO's Avatar
    Join Date
    Aug 2020
    Age
    46
    Posts
    174
    Quote Originally Posted by greg82 View Post
    really old thread... but thought I would post that I have a 2006 Chevy 2500 HD with a 6.0 and NV4500 manual trans. The OS is 12587811 and I have the xdf for it if needed.
    Don't be shy, share them!

  6. #6
    Fuel Injected!
    Join Date
    Aug 2020
    Posts
    20
    I can't upload files, so here's a shared file link https://drive.google.com/file/d/1zq1...ew?usp=sharing

    Maybe someone can download it and upload it back?

    What I don't see in the xdf is the VATS, maybe it's called something else?

  7. #7
    Fuel Injected!
    Join Date
    Aug 2020
    Posts
    20
    Looks like it's called VTD in this version of the OS / XDF . I'm going to try changing the parameters and writing the PCM.

Similar Threads

  1. 2006 TunerPro Bin Files
    By EagleMark in forum TunerPro OBDII Bin Files
    Replies: 17
    Last Post: 01-30-2024, 06:27 AM
  2. 6395 7427 8625 Manual Trans Calibration Listing
    By 1project2many in forum GM EFI Systems
    Replies: 22
    Last Post: 03-28-2019, 02:54 PM
  3. NEEDED: 16197427 5.7L Manual Trans bin
    By EagleMark in forum GM EFI Systems
    Replies: 76
    Last Post: 02-14-2017, 09:41 AM
  4. 96-97 Vortec Manual .cal or .bin file needed?
    By EagleMark in forum TunerCat OBDII
    Replies: 4
    Last Post: 01-30-2013, 08:33 PM
  5. 16197427 Park Neutral Switch on a Manual Trans bin?
    By EagleMark in forum GM EFI Systems
    Replies: 3
    Last Post: 12-19-2011, 09:09 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •