newbie problem

[EagleMark]

Not without a data log to tell them what to read.

Or do you mean they are blank? If they are blank it's because I add a butt load of pre made dashboards to ADX files I work on, but you need to Right Click on each gauge and choose from the list what you want there.

[brad454]

No what I mean is that the gauges are unreadable. Say for instance rpms. The needle is pointing to a scratch instead of a number.

[Six_Shooter]

I think a screen shot is needed to understand the problem.

[brad454]

The laptop is outside out of range of the hotspot. Let me get a screenshot and I will post it up in a while.
Thank you for your assistance. It is much appreciated.
Brad

[brad454]

Here is the screen shot after I used 4F. The truck wasn't hooked up. Is it supposed to be like that?

Thanks Brad

tunerpro.jpg

[EagleMark]

Ahhhhhhh.....???? Something is wrong? I just checked and those ADX work fine, I actually used them a couple weeks ago on a truck too... but it's like your computer is missing fonts? or?

[brad454]

I wonder what is wrong!!! I used this laptop before with TP and didn't have a problem. I will check into it.
Thanks again for all your assistance
I will let you know what the problem was if I figure it out.
Brad