How do I download and open any .xdf file without having download a bunch of other ("free software" )
How do I download and open any .xdf file without having download a bunch of other ("free software" )
Last edited by 7399MGM; 09-18-2013 at 09:32 PM.
Thanks, for the reply, but I do not have TunerPro, I have a GQ-4X programmer -- I tried several so called "free" programs, but so far no luck - how do you open those darn files?
7399MGM
As said XDF (and ADX files for that matter) only work in Tuner Pro and Tuner Pro RT.
The type of programmer you have has nothing to do the xdf file.
Is it really a bin file you're after? That's the only file that you would use with a programmer and EPROM.
The man who says something is impossible, is usually interrupted by the man doing it.
The type of programmer you have has nothing to do the xdf file.
Is it really a bin file you're after? That's the only file that you would use with a programmer and EPROM.[/QUOTE]
Thanks for the reply- yeah, I am new to this. I have a GQ-4X programer and need to load certain files to read the EPROM and to reprogram. Are there any other files I need to load? Supposedly it needs a .bin file and the MAP file to read the chip. I have an 1228062 ECM which is out of a GM S10 for the engine (2.8l V6) I will be using, but I also have a 1227302 ECM which I want to use for the new installation (I removed the intake manifold etc to change fromm TBI to MFPI) i.e. a V6 into an MGB.
Any help would greatly appreciated.
Thanks,
7799MGM
Bookmarks