Thanks to this great site I am using TunerPro RT to log my Dad's 1995 K2500 5.7 NV4500 5sp truck!
I swapped in the smallest Lunati VooDoo cam and I'm sure it needs tune work!

There doesn't seem to be a whole lot written about my ECM, other than it is similar to a 7747, so I thought I would share what I found.
My ECM is a 161939396 BCC:BDTP





I found my .xdf & .adx for TunerPro RT in post 4
http://www.gearhead-efi.com/Fuel-Inj...5-speed-manual

Everything is connected and I did an idle log today! And also found a fuel leak I need to fix....


Is there any favorite threads for me to read to set up TunerPro to get the most useful data?

I'm still learning, but I hope to generate the logs needed for EagleMark to tune this thing up for me soon!

Oh, for newbies like me...this little write up was helpful getting started along with TunerPro starter Tutorial!
http://www.gmt400.com/forum/showthre...D1-Datalogging


Just for the heck of it, here's a pic of Dad's truck.