Under Tools, Preferences, Data Acquisition look to see that "Load Last Data Aqc file at Start" is checked. If not then you need to load your ADX file every time to data log. Don't need XDF to data log.
Under Tools, Preferences, Data Acquisition look to see that "Load Last Data Aqc file at Start" is checked. If not then you need to load your ADX file every time to data log. Don't need XDF to data log.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
1994 Z28 Red, hardtop, 4L60e, LT1 with Stage 1 ported stock heads, cc305 114 LSA, 1.6rr, beehives, SLP Ultra Z hood/air box/spoiler, Pacesetter LTs, LS1 front brakes, Kenny Brown Double Diamond SFCs.
1994 Z28 Arctic White, dormant.
Yup! Unless you have an AutoProm it would need to be Plug in for a regular cable. Then under that configure cable and make sure you get the right Com Port.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
The only time TP RT will "find hardware" is when you are using emulation equipment, such as an Auto Prom in emulation mode, or an Ostrich 2.0. That function will not detect datalogging hardware.
The man who says something is impossible, is usually interrupted by the man doing it.
1994 Z28 Red, hardtop, 4L60e, LT1 with Stage 1 ported stock heads, cc305 114 LSA, 1.6rr, beehives, SLP Ultra Z hood/air box/spoiler, Pacesetter LTs, LS1 front brakes, Kenny Brown Double Diamond SFCs.
1994 Z28 Arctic White, dormant.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
1994 Z28 Red, hardtop, 4L60e, LT1 with Stage 1 ported stock heads, cc305 114 LSA, 1.6rr, beehives, SLP Ultra Z hood/air box/spoiler, Pacesetter LTs, LS1 front brakes, Kenny Brown Double Diamond SFCs.
1994 Z28 Arctic White, dormant.
Bookmarks