You're going to have to start with another bin, you are in Limp Home Mode.
$0D bins are 64 kb, you have posted a 32 kb bin.
Download one of the $0D bins from the site that closely matches your combination and go from there.
You're going to have to start with another bin, you are in Limp Home Mode.
$0D bins are 64 kb, you have posted a 32 kb bin.
Download one of the $0D bins from the site that closely matches your combination and go from there.
Last edited by Six_Shooter; 03-05-2014 at 05:08 AM.
The man who says something is impossible, is usually interrupted by the man doing it.
I was looking through it and everything looked fine, what I looked at anyway... but yeah it's no good to use anymore if half of it is gone? You may be able to patch it together in hex... but after all this I'd be starting with a fresh bin.
The O2 sensors had some changes that I don't think would work well? The the rich, lean and mean.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
I did notice the size was small earlier but wasn't sure if there was a reason or not. Thank you everyone for all of your help! I will have to mess around with a stock bin and try to make it work. I have vortec heads, ZZ4 camshaft, 9.5:1 compression, and the red 454 tbi injectors, so I know I will have to change flow rates. I will try playing around tonight. If I can get the thing to at least start, I will try to get a data log. Again, thank you so much for the replies!
Bookmarks