i have a set of injectors i got in a tbi from the junk yard and i am trying find out about them . i checked the injector section on this forum and it wasnt here. someone asked on the thirdgen site but didnt get much info. anyone have any ideas?
i have a set of injectors i got in a tbi from the junk yard and i am trying find out about them . i checked the injector section on this forum and it wasnt here. someone asked on the thirdgen site but didnt get much info. anyone have any ideas?
If its factory there should be a Gm part number laser etched on the top. Should be an 8 digit n mber I believe. There should also be a colored plastic part "molded" I to the top around the center.
Buddrow
If it don't fit force it, if it don't force fit f&%@ it!
The colors on top are paint dabs and I haven't seen any color left on them in years... but the numbers should be on top! Then look here to see what they are:
http://www.gearhead-efi.com/Fuel-Inj...d-part-numbers
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
They are an aftermarket knock off. Should be another number on them too? Could have them serviced and see what they flow?
I like GM injectors! I've had dozens of sets serviced and only ever had 2 that would not work. Both were rusty and looked like they would not work...
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Bookmarks