cannot trace data tables

[carcaper]

I have read the forums for days, I have tried opening tables, I have tried different settings, I have data reading on gauges but cannot read trace on tables. And for that matter I cannot even find the table to adjust the fuel map.
1987 Chevy Camaro 5.7 TPI Auto using suggested definitions according to Tuner Pro Chart. What am I doing wrong. Please help!

[EagleMark]

Same answer as I gave you in your PM.

Then I'm sure you have seen this?
http://www.gearhead-efi.com/Fuel-Inj...unerPro-How-To!

I've tried to get data tracing to work on another MAF vehicle, the LT1 $EE and the data stream information to match the bin/XDF is not there.

So you may have to make history tables?
http://www.gearhead-efi.com/Fuel-Inj...es-in-TunerPro

I've never used $32b so I'm not much help... and kind of short on time trying to finish some of my own work before I go for a big surgery april 15th.

Have you looked around on thirdgen.org ? That is the home of this car and they do have some great help! Hope that helps!

Mark

[delcowizzid]

you have to link the xdf and adx under edit xdf first.then you have to setup every table you want bubble tracing to work on by editing items in items list one at a time.