Originally Posted by
1project2many
Yes. Open both calibrations in simultaneous instances of tunerpro and copy tables. Look at the constants as well and grab everything that doesn't seem to be a transmission variable. If you have questions about tables with dissimilar names or if you find a variable without a matching counterpart in the opposite cal, research it, post the question, etc. The definition files for this pcm are very good with notes so you've got a head start on a successful conversion.
As you get deeper into this project you might want to explore the idea of enabling factory torque management. Your 7.4 exceeds the 60 rating of the trans.
Bookmarks