I have done all the necessary changes in the bin and the mod to the PCM. My idle seems to be a tad rough, almost like a miss. I installed a new cap, rotor, and MSD wires while I had it apart. The truck starts great and runs good other then just a slight issue at idle. Just wondering if there is something I missed in the tune. The injectors are stock LT1 with about 60K miles on them running at stockish LT1 fuel pressure 40-43 pounds. I have not had a whole lot of time for tuning a logging. I am going to hook up a vaccum gauge this weekend and maybe readjust the valves to see If I can find anything there.

The truck has always had a wierd issue that I cant seem to figure out, where Acceleration Enrichment activates at idle randomly. I maxed out the MAP qualifier to enable AE at idle and it still does it.

Here is a copy of the current bin I have been playing around with.