Quote Originally Posted by dave w View Post
I think the attached .bin file will be EXTREMELY HELPFUL. The attached .bin has been tested, and is in use somewhere in North America.

The original .bin file I modified for MPFI is from a very well known aftermarket EFI company. The attached .bin file requires the Memcal Jumper Modification, and the solid wire modification to the sense resistors inside the PCM!!!

Standard Disclaimer; Use at your own risk.

dave w
Dave: Thanks very much for the reply. I will try that .bin file. Not sure what the attached .JPEG file is to represent. The attached image file is what was gleaned from the MPFI Modified $31 Aftermarket 454 Chip.BIN. Don't understand the vast differences between the two.