when deccelerate and engage the clutch the engine some times stalls. when read my logs I see at 400RPM there is 0 spark advance, is this to litle?
my settings are:
DFCO Enable RPM Threshold 1400 RPM
DFCO Disable RPM Threshold 1200 RPM
DFCO Enable MAP Threshold 28 Kpa
DFCO Disable MAP Threshold 30 Kpa
DFCO Disable RPM Decrease Threshold 2500 RPM/sec
DFCO Enable Coolant Temp. Threshold 20 Deg. C
DFCO Enable MPH Threshold 15 MPH
DFCO Enable Delay Timer 0.3 sec.
DFCO Spark Retard 35 Deg.
I have AFR 180 heads and a lt4 hotcam
Are my setting Ok?
Bookmarks