Here's the results of today:
Now, I see no MAP values other than 10.35kpa, and Baro values are stuck at 95kpa, and even looking directly at the E-side values, they never change or are updated. It's like the new code isn't even being executed at all.
I can't get the actual raw values (by putting them into the mode 1 message 0 stream) to give data-which is why I don't think they're actually being executed. That's why I loaded the E-side ADX, I filled in value 49 and 50 from the ALDL message table with the 0369 and 036A values, which should be RawMAP and MAP map exceeds 1BAR, and you'll see the MAP exceeds 1 bar flicker a moment but never does the RAW ECM MAP value change.
Bookmarks