new $EE tuning thing!

**johnny_b** · 06-19-2016

kur40 this is with the engine on, I press "stream" and it still says no data.

**kur4o** · 06-19-2016

Originally Posted by johnny_b

kur40 this is with the engine on, I press "stream" and it still says no data.

With engine off ignition on do you get any data.

I never got the chance to test the patch with engine running.

**lionelhutz** · 06-20-2016

Can we control or test the line pressure or force motor current on an automatic?

**steveo** · 06-20-2016

if you get me the mode 4 commands and I'll happily add them to the beta, maybe kur4o has them

**lionelhutz** · 06-20-2016

On another note, the filtered VSS was around 1/2 of my actual speed on the transmission tab.

**Thatdudeorion** · 06-20-2016

Originally Posted by lionelhutz

On another note, the filtered VSS was around 1/2 of my actual speed on the transmission tab.

Same here.

**steveo** · 06-21-2016

can you give me a log with both the engine and transmission data together? i can correlate the two and figure a proper correction factor and fix the definition.

**johnny_b** · 07-01-2016

Originally Posted by kur4o

With engine off ignition on do you get any data.

I never got the chance to test the patch with engine running.

engine off ignition on I get data but its all zeroes, if i start the engine its still all zeroes and nothing ever changes. E-side datalog didnt save either? Is there another patch for the E-side that I'm missing?