Changing from $88 to $8D mask, bin.

[RBob]

So far i have changed the # of cylinders, idle max speed, VVS pulse, injector flow rate, and a few other things.

The VSS PPM is the same between the '90-'92 MPFI cars and the '90-'92 TPI cars.

RBob.

[fasteddi]

It was closes but not the same.. 4004.78/mile was mine.... and IIRC the $8D bin I had was 4008.94/mile

[Six_Shooter]

That's essentially the same. The difference is probably in the calculation used in the XDF. I also notice that whan some. Ales are saved they save as a slightly different value than input.

[fasteddi]

Ahh ok thanks!!

[fasteddi]

Any one know of a way to transfer the values from my $88 bins to the $8D bin faster then typing them all?? Expsecially the VE and SA tables.

[EagleMark]

Have your 8D bin open in TunerPro. Go to Compare and load your $88 bin and check the box. Then when you have ... no that won't work with differant masks...

Tools, Custom tools and open New TunerPro Instance. Now you have 2 TunerPros open. Open your $88 bin in one and $8d bin in other, if tables are identiacl you can click top left cell to highlight entire table and copy, same on other side and paste. If tables are differant then one line at a time...

[Six_Shooter]

Don't copy values in tables over, especially VE and spark tables. The calculations are different between differen codes, and can cause problems when swiching to a different mask.