Hi guys,
I got two problems with my Ford 400 TBI conversion.
Firstly, DFCO does not engage. Well, almost not, in an hour of driving it engaged once, on a Autobahn off-ramp (it's in the log, but I did not find the exact moment yet)

Secondly, HiWay Lean Cruise only gets enabled after 15 to 20 Minutes of driving (almost exactly at the 15-minute mark of the log, but I only started logging once she was properly warmed up).

I must confess that I am at a loss as to what to do now. It'd be great if someone could look at the bin and the log file and give me some recommendations as to what to change.

Thank you all in advance!