I am in the process of collecting all the necessary parts I would need to Convert my Chevy 305 motor to TBI. So far I have the following items from a donor vehicle which I picked from the salvage yard. All of the parts came from a GM 350 motor 1989 I believe. I could not remove the intake because four(4) of the bolts snapped off so I have to look for another one.
ECM ( I lost the tag with the ECM number)
Complete Electrical Harness. (I hope I cut it correctly) I will post a picture for comments
TBI Unit
Distributor and Coil
I am awaiting the following:
Original TBI intake Manifold. (Reason being is that when I install this engine in a Jaguar XJ6 I would not have any room for hood clearance if I were to use an aftermarket manifold which may require an adapter for the TBI unit. Am I wrong in thinking this way?)
I will be purchasing the TPS,MAP sensor,CTS, inline fuel pump, O2 sensor and a Knock sensor. Am I missing anything? I may want to eliminate the EGR system for simplicity sake. Am I wrong in my way of thinking?
Any and all input will be greatly appreciated.