Fuel Pump Cycle Module - Needed ???

[EDZIP]

Installing a Speed Density TPI setup in a 1994 K2500 and using the 1227730 ecm. (Have a TPI pump in the tank)

Truck has a 1619636 ECM and I'm in the middle of re-pinning to the 730.

The 94 truck has a Fuel Pump Cycle Module (FPCM -pic attached), looking at the schematic (also attached) I'm not really sure if I even need the FPCM with the TPI conversion (don't see one in my 730 schematic)?

The FPCM was used in the truck with TBI...is this something I can delete?

Thanks.