convert tun to bin

[okay]

Binary data storage / priority uses different forms. Your software appears to store the bin in Little Endian format. I first converted your bin to Big Endian format (which most tuning software will recognize, and open), then I edited this reformatted bin using Tunerpro. Once the editing was complete, I converted the format back to Little Endian, so that you could flash it.

I looked up the user manual for your software. If you go to the Buffer Menu, it appears you can switch between Little Endian and Big Endian format using the "swap bytes" option.

LS1 engine run video
https://www.4shared.com/video/pSePeV..._17-02-25.html

do you have special XDF file (tunerpro)?
I can't find xdf file for this type of pcm

[LRT]

do you have special XDF file (tunerpro)? I can't find xdf file for this type of pcm

No. The only OBD2 XDF that I know of was written by dimented24x7. It was for os 12202088. This os was what was in the bin you posted.

[okay]

No. The only OBD2 XDF that I know of was written by dimented24x7. It was for os 12202088. This os was what was in the bin you posted.

thank you for teching me
I want to post new thread and explain this subject with image
I think there are many people they want know this
can I do ?

[dave w]

thank you for teching me
I want to post new thread and explain this subject with image
I think there are many people they want know this
can I do ?

Yes please, post the explanation. Please be mindful of copyright material.

dave w