God I hope im doing this right
So i put a tbi kit on my jeep 258. Working on getting tunerpro rt set up. I dont know right from wrong here. Ive downloaded the .bin, .xdf, and .adx files and have them in tunerpro. Im scared to death im going to screw something up. Is it possible to damage something if i have the incorrect files installed? I dont know where to begin. Any help would be great to get me going.
No, your data would be garbage, but no damage
Square body stepsides forever!!!
That's good to know. Got it all set up last night, tried to connect and the connect bar got stuck connecting...Any ideas?
Last edited by bubbafreejohn; 07-14-2016 at 05:28 PM.
What ecm and files are you using
Square body stepsides forever!!!
the ecm is a 7747, apab $42-4.3 manual .bin, $42-1227747-v5.9.3.xdf, and $42-1227747-v5.2.adx, was outside and managed to get it to connect, then after about a minute the rpm's jumped from 750 to 1800 on their own,,,,freaked me out, shut it down. I think i need to try v3.adx.
Last edited by bubbafreejohn; 07-15-2016 at 06:06 PM.
is your vehical a 4.3 standard trans? that is what mine is and the adx an xdf worked okay but I removed it then reinstalled, are you running xp 7 or windows 10?
Posting Permissions
Reply With Quote
Bookmarks