Up and running again. Using BIN AKAH. At first it was doing the same thing it did in September. it was hunting around 500 to 1000 rpm but tried to stay around 6 to 800 rpm. FP was still set at 9psi. Bumped up to 11 psi and RPM settled down a little around 700 but still a little jerky,Hg was a little jerky at about 18 and advance stable at 18*.
Bumped FP up to 12 and RPM settled to a fairly smooth 700, Hg steady at 19 and adv steady at 18*. Q? Do these numbers seem reasonable?
In addition to these adjustments I did some smoothing of VE.
Also used spark latency table suggested by Fast355 and maxpowerta for Corvette large cap HEI distributors. Re: Thread: Mpfi on OLDS 455; will this distributor work? I'm using $42 but the table is for a different computer and I hope that is OK??
Should be getting my laptop back by next week.
Thanks for the help. Bob