Thanks
I was on a steep learning curve. Tuning a stock engine was still a challenge.
That kind of thinking is 100% correct!
See attached screen shot of 0411 injector parameters. I copied / pasted the L31 5.7 liter injector parameters from a stock tune. It will be very challenging to find aftermarket injector parameters that will copy / paste into the '0411 parameters.
Maybe the option of factory 8.1 Liter injectors (about 30 lb) are an option?
dave w
Happy Holidays All. - Just a small update to my 24x conversion. I stripped out the OBDI harness and installed the OBDII (0411) today. The front of the engine has been stripped down to add in the 24x crank reluctor. The coil packs are mounted and SP wires are done. Here are some links to photos. Hope you like.Cheershttps://lh3.googleusercontent.com/tu...V=w802-h602-nohttps://lh3.googleusercontent.com/mu...1=w802-h602-nohttps://lh3.googleusercontent.com/mn...K=w802-h602-nohttps://lh3.googleusercontent.com/NN...m=w802-h602-no
Last edited by Mikey G; 12-27-2016 at 03:26 AM.
Bookmarks