Replaced the 02's & knock sensor again just for fun.
AFR Guage matches the O2's but output appears different when read by EEHack....
Idle: BLM's 119_128... AFR 14.5-15 EEHack is showing 17.0
PE O2's read 850-880mV EEHack is showing 14.7
Wideband reads 22.39 at power on & 7.45 until car fires up. Pretty close to full range.
I did recalibrate the LC2 Wideband a few months ago but need to check output settings. Steveo mentioned narrowing the range but i'm pretty certain i didn't alter it from the std 0-5V output.
Steveo: Can i see the actual value of the AC Pressure anywhere?
Any suggestions.
Thanks
Mitch
Bookmarks