Could you do this same thing with a 4l80e truck? Leave the factory computer in place and run a carburated engine? As long as you had a tps mounted on the carb and a rpm signal?
Could you do this same thing with a 4l80e truck? Leave the factory computer in place and run a carburated engine? As long as you had a tps mounted on the carb and a rpm signal?
1993 K2500 Suburban
350TBI/4l80e
The vss should still be intact if the original harness is hooked up correct?
1993 K2500 Suburban
350TBI/4l80e
Withdraw
Last edited by billygraves; 08-09-2018 at 07:10 PM.
Bookmarks