Found and fixed improperly handled array bounds logic in all three table lookup routines that could have impacted any min/max transition adversely. Sweep test framework has been added as a conditional. Somewhat embarrassed to have put this out for consumption by the general public, but then again it's code that makes a v8 run to beyond 6500 rpm without a mechanical distributor and it cost you nothing to download.

Drove the fixes home over my normal 63 mile "back roads" route and the butt-dyno was not disappointed. Idle seems to be slightly more stable and overall torque was more authoritative / bordering on brutal in the mid-2000 rpm range.

Planning to add a dwell base adjustment - thinking "-" globally decreases the map vs rpm multiplier table, and "+" increases it. So ten "-"s fed into the uart would adjust the base multiplier from 128 to 118 and vice versa.

Will try to get this ready for public consumption early next week.