TunerPro Connection issue 7747 $42

[ninerscout]

Thanks a lot guys. I got my hardware to work. It took a little while to figure it out. I had to uninstall winaldl. What I am trying to do is log data and use the excel spread sheet to tune my VE tables. I can log data with th 42.ads file converted to a adx file. My temp starts with a high number and when it warms up the temp number gets lower. So I changed the adx file to AO33.ads and my temperature reads normal but I can not find the histogram log to put in the spread sheet. Do I need a different adx file?

Ninerscout

[EagleMark]

If you got it working now just go back and use the $42-1227747-V3.adx

Or better yet here is the next version with some more added features.

Need to open BLM history table and watch it fill although the data should be there without, when I am using it to tune I have it opena dn watch and adjust the biggys live with an Emulater.

[ninerscout]

I can not get either one of those links to work. After I save and load the $42-1227747-V4.1.adx definition file it freezes tunerpro and in the title bar at the top of the screen hasADX file- A033.adx (not responding). The $42-1227747-V4.1.xdf‎ I can only save as a htm file and do not know how to convert it to an xdf. And there are no history tables in any of my ADX files that do work. Maybe I need an Emulater to tune?

Thanks
Ninerscout

[EagleMark]

Well just click on it and wait for your computer to respond. Or right click and save target as. Just checked them and they both work. Had other people use them fine.

Your TunerPro freezing when opening a new ADX file happens to me sometimes when I have history tables, monitors, Item lists or dash boards open from another ADX file. Close all them and open the ADX from above.

[ninerscout]

Thanks a lot EagleMark, I closed everything and the ADX opened fine. I would like to figure out why I can not get the XDF to work. I know I am just doing something wrong. I am going to log data today and work on it tonight.

Ninerscout

[EagleMark]

Well you have to Select XDF and it will load in TunerPro. Then file Open Bin and it has to be a $42 mask ID bin for the $42 Mask to work. Post up your bin and I will check it.

Remember to connect to car when running and if getting data have to go to Acquisition then Record and you will be recording data, then when done Acquisition stop and you will be promoted to save the file with a name.

[ninerscout]

I can get $42-1227747-V4.1.xdf‎ to work but only as a $42-1227747-V4.1.htm. Everything comes up. Lots of options. I hope everything works O.K. as a .htm file. I figured a lot of things out from all the threads on here and various other forums.

Thanks Everyone,

Ninerscout