Quote Originally Posted by spfautsch View Post
I did confuse Tunercat with Winflash earlier. It's been that long since I used either. I would not recommend Tunercat for editing your bin as it's definition file is somewhat outdated and missing a lot of parameters that are available with one of the many EEX files floating around here. Winflash is also unnecessary.

As far as a cable what I used was this. Unfortunately it's currently out of stock everywhere, but it already has the necessary buffer circuitry. All one has to do is solder RX+TX together and wire that to pin 9 of the aldl, and then connect ground to aldl pin 5.

Excuse me for my lack of knowledge but a tunerCat/tunerpro aldl cable still requires soldering? I was under the impression they were out of the box hookups