yea I read that and didnt get a chance to delete it
1986 Pontiac Bonneville 305/2004r rebuilt and 3.42 rear gears.
1999 9C3 Lumina L67 .4T65E-hd
2004 E250 5.4r75w dana 60 rear with 3.73 gears
Next question, does the Ostrich 2.0 do everything of will I need a socket adapter . I checked and it is the "730" ecm
1986 Pontiac Bonneville 305/2004r rebuilt and 3.42 rear gears.
1999 9C3 Lumina L67 .4T65E-hd
2004 E250 5.4r75w dana 60 rear with 3.73 gears
Hello Jim_Rockford,
The Ostrich 2.0 will work with the 1227730 without a socket adapter.
Sorry for the late reply, Im working on moving to Fla. I drove the car yesterday, runs pretty good, having clutch problems so I couldn't drive it like I stole it, I hope to be able to start on getting this stuff when I get down there.
IMG_20170814_193314.jpg
Last edited by Jim_Rockford; 03-28-2018 at 01:23 AM.
1986 Pontiac Bonneville 305/2004r rebuilt and 3.42 rear gears.
1999 9C3 Lumina L67 .4T65E-hd
2004 E250 5.4r75w dana 60 rear with 3.73 gears
OK Im down in Fla and kinda settled, Im gonna order all m stuff to tune with, I drove the car some more, and it loads up in 5th, you have to pull it down into 4th to drive it, Can I send someone a data log and get a temp chip to tide me over till my crap comes in? just found one on Ebay for 162 shipped . figure that wasnt bad...
Last edited by Jim_Rockford; 04-22-2018 at 04:03 AM.
1986 Pontiac Bonneville 305/2004r rebuilt and 3.42 rear gears.
1999 9C3 Lumina L67 .4T65E-hd
2004 E250 5.4r75w dana 60 rear with 3.73 gears
I could help you with a chip. I would use the Moates.net G1 adapter, with the chip installed into the adapter, see attached picture.
Send me a Private Message (PM) if your interested in the details. It's likely the parts from Moates.net will get to Florida faster than I can get parts to you from Washington State.
The G1 adapter can also be used with an Ostrich 2.0 chip emulator. (see picture below)
dave w
Bookmarks