the site won't allow csv uploads. hmmm?
hopefully you can pull what you need from the log and other defs.
Ron
the site won't allow csv uploads. hmmm?
hopefully you can pull what you need from the log and other defs.
Ron
I exported the .csv from the .xdl, thank you for posting the .adx file.
The attached .zip has an excel spreadsheet with the TPS and MPH sorted, assuming 0% TPS and 0 MPH = Idle.
I was not able to "crunch" the data, hopefully the attached excel spreadsheet will help you.
dave w
Based on the spreadsheet posted, the Idle Averages (TPS% = 0% and MPH = 0) are listed below:
Tach = 900 RPM
MAP = 40.9 KPa (fair, 35 KPa would be better)
Spark Advance = 25.4 degrees (seems mostly normal, perhaps 20 degrees would be better or worse?)
BLM = 114 (poor, 128 would be ideal)
The correction factor for 114 BLM is 114/128 = 0.89. So try multiplying the VE value for cell 900 RPM's ~ 40 KPa by 0.89 to get the idle BLM averages closer to 128. Let's see what happens after correcting the VE table, before making changes to the spark table.
dave w
Bookmarks