I might have access to a blow motor Suburban, but its a 95-96. Would that work? Not TBI though.
I might have access to a blow motor Suburban, but its a 95-96. Would that work? Not TBI though.
Unfortunately no. 95-96 are completely different animals.
I figured that. Trying to get my old box back now.
The ECM in the picture you posted is designed to run $0E calibrations. It may not work properly with your transmission. If you are not having issues with your transmission, then the memcal you posted will run on that ECM. You may want to find a blue memcal for a 350 and ha e 1project burn a new calibration for you. Fleabay may have memcals.
Square body stepsides forever!!!
My box is on its way, along with some sort of a blue memcal in it. I just drove 250 miles, 13mpg...when I used to get 17, hmmmm.
Chat amongst yourself til I find out what I am getting. ;)
I have my BHAS box back, along with a memcal: 5884 BHRD 1193354
Is that memcal going to do anything for me?
Hello...
BHRD is also a V6 calibration. It's from an all wheel drive Astrovan.
Do you buy from Ebay?
https://www.ebay.com/itm/Prom-Chip-B...S!-1:rk:7:pf:0
Or, depending on where you're at, Hanser's and Dietz's in Billings are both showing a pile of computers. 16197427 and 16196395 are suitable replacement numbers for that pcm. Hanser's used to give me better pricing but both yards were willing to box n ship and they would usually include a memcal if you asked. Of course it's been a *few* years since I was out there.
Figures. I do eBay, but at this time I have run out of $50 bills...meh. If I knew for sure it was going to resolve it, I would pull the trigger. There really isnt anything else left to replace. I was hoping to be able to dig one up to try for now.
Bookmarks